Guide to Shop Aluminium Sliding Door Wheels in HANZSON

Wheel Material & Bearing Type:
Wheel Material:
Nylon/POM: Most common. Durable, quiet, good wear resistance, handles moderate weight. Best for typical wooden/laminate doors.
Steel: Highest durability and weight capacity. Ideal for very heavy doors (e.g., thick solid wood, large mirrors). Can be noisier unless well-lubricated or combined with nylon inserts. Check track compatibility.
Bearing Type (Inside the Wheel):
Sealed Ball Bearings: Best for smoothness & longevity, especially under heavier loads. Resists dust and corrosion. Highly recommended.
Nylon/Bronze Bushings: Simpler, cheaper. Adequate for very light doors but less smooth, wears faster, and more prone to binding/dirt issues than ball bearings.
Avoid wheels with no identifiable bearing/bushing – just plastic on plastic.
Mounting Bracket:
Material: Steel brackets are strongest for heavy doors. Reinforced nylon/plastic can be sufficient for lighter doors.
Height Adjustment Mechanism: Essential! Look for brackets with an integrated screw-adjustment. This allows you to precisely level the door and raise/lower it if the track sags or the floor is uneven. Easy adjustment saves huge headaches later.
Attachment: Ensure the screw holes align with existing holes in your door bottom (or that you can drill new ones without compromising the door). Check screw size/length provided.
Number of Wheels per Door:
Most standard wardrobe doors use 2 wheels.
Longer/Taller or Heavier Doors: Often require 3 or 4 wheels to distribute weight evenly and prevent sagging/binding. Check your door's original design or manufacturer specs.
Noise Level:
Quality bearings (ball), well-lubricated steel wheels, or nylon wheels generally run quieter.
Avoid worn-out bushings or dry metal-on-metal contact. Some wheels have rubberized treads for extra quietness.
Replacement vs. New Installation:
Replacement: Take the old wheel/bracket with you if possible. This is the best way to guarantee a match. Measure it carefully (diameter, groove width/depth, bracket shape/size, screw hole spacing).
New Installation: Follow the track manufacturer's recommendations for compatible rollers.
Selection Checklist Summary
✅ Measure Track Profile: Width & Depth. Match wheel groove exactly.
✅ Weigh Door: Calculate weight per wheel. Choose wheels with >20-30% extra capacity.
✅ Choose Wheel Material: Nylon for most, Steel for very heavy.
✅ Choose Bearing Type: Sealed Ball Bearings preferred.
✅ Check Bracket: Steel for heavy doors, height adjustment MUST-HAVE.
✅ Count Wheels: 2 for standard, 3-4 for long/heavy doors.
✅ Consider Noise: Ball bearings/nylon wheels quieter.
✅ Bring Old Wheel: (For replacement) Best guarantee of fit.
Where to Buy & Pro Tips
Hardware Stores: Bring measurements/old parts. Staff can often help match.
Specialist Hardware/DIY Stores: Better selection for specific profiles.
Online Retailers: Vast selection, but measurements are critical. Read reviews carefully.
Check Packaging: Ensure specs (weight, track type) are clearly listed.
Buy Quality: Cheap rollers fail quickly, damage tracks, and cause frustration. Invest in durable bearings and materials.
Lubrication: Use a dry silicone spray (not WD-40 or oil which attracts dirt) on the track occasionally for smoother, quieter operation. Don't lube the wheels themselves unless specified.

1. Purpose of Pulleys
Windows: Found in older double-hung windows. Pulleys guide the sash cords/chains connecting to counterweights hidden in the window frame. They allow smooth vertical movement.
Sliding Doors: Heavy doors (e.g., patio/barn doors) use pulleys to reduce friction and support weight along a track.
2. Basic Operation
Opening/Closing:
Windows: Gently lift or lower the sash. The pulley rotates as the cord moves with the counterweight.
Sliding Doors: Push/pull horizontally. Pulleys roll along the overhead track.
Tilting (Modern Windows): Some newer double-hung windows tilt inward for cleaning. Pull the sash down slightly, then tilt toward you (check manufacturer instructions).
3. Maintenance for Smooth Operation
Cleaning:
Wipe pulleys and tracks with a dry brush or vacuum to remove dust/debris.
For sticky residue, use rubbing alcohol or vinegar-water mix on a cloth (avoid drips).
Lubrication (Critical!):
Use silicone spray or dry lubricant (e.g., graphite powder). Avoid WD-40 (attracts dirt).
Apply sparingly to pulley wheels and tracks. Wipe excess.
Frequency: Every 6–12 months, or if operation feels stiff/noisy.
Check Cords/Weights (Windows):
If a window won’t stay up, the cord may be broken. Inspect by removing the interior trim (advanced).
4. Safety Tips
Never force a stuck window/door – risk breaking pulleys or cords.
If a window sash feels loose or drops suddenly, stop using it – counterweights may be disconnected.
For cord/weight repairs, hire a professional unless experienced (weights are heavy!).
5. When to Replace Pulleys
If pulleys are cracked, excessively rusty, or won’t spin after cleaning/lubrication.
Replacement pulleys must match the original size/type (check hardware stores).
Advanced: Replacing Sash Cords (Double-Hung Windows)
This is complex and often requires:
Removing interior window trim.
Accessing weight pockets.
Threading new cords and tying weights.
Recommendation: Hire a window specialist unless you’re experienced.